Wireless Sensor Networks Publications

– G. Moreno, G. Mujica, J. Portilla and J. -S. Lee, “Implementation of a Grey Prediction System Based On Fuzzy Inference for Transmission Power Control in IoT Edge Sensor Nodes,” in IEEE Internet of Things Journal, 2024, doi: 10.1109/JIOT.2024.3373263

– C. Wisultschew, R. Hernández, C. Pastor and J. Portilla, “Synthetic LiDAR Labeled Dataset Generation to Train Deep Neural Networks for Object Classification in IoT at the Edge,” in IEEE Internet of Things Journal, 2022, doi: 10.1109/JIOT.2022.3194716.

– C. Wisultschew, A. Pérez, A. Otero, G. Mujica and J. Portilla, “Characterizing Deep Neural Networks on Edge Computing Systems for Object Classification in 3D Point Clouds,” in IEEE Sensors Journal, 2022, doi: 10.1109/JSEN.2022.3193060.

– J. Señor, J. Portilla and G. Mujica, “Analysis of the NTRU Post-Quantum Cryptographic Scheme in Constrained IoT Edge Devices,” in IEEE Internet of Things Journal, 2022, doi: 10.1109/JIOT.2022.3162254.

– R. Castro, G. Mujica and J. Portilla, “Internet of Things in Sport Training: Application of a Rowing Propulsion Monitoring System,” in IEEE Internet of Things Journal, 2022, doi: 10.1109/JIOT.2022.3163181.

– G. Mujica, J. Henche and J. Portilla, “Internet of Things in the Railway Domain: Edge Sensing System Based on Solid-State LIDAR and Fuzzy Clustering for Virtual Coupling,”in IEEE Access, vol. 9, pp. 68093-68107, 2021, doi: 10.1109/ACCESS.2021.3077728.

– C. Wisultschew, G. Mujica, J. M. Lanza-Gutierrez and J. Portilla, “3D-LIDAR Based Object Detection and Tracking on the Edge of IoT for Railway Level Crossing,” in IEEE Access, vol. 9, pp. 35718-35729, 2021, doi: 10.1109/ACCESS.2021.3062220

– R. Marino, C. Wisultschew, A. Otero, J. M. Lanza-Gutierrez, J. Portilla and E. d. l. Torre, “A Machine-Learning-Based Distributed System for Fault Diagnosis With Scalable Detection Quality in Industrial IoT,” in IEEE Internet of Things Journal, vol. 8, no. 6, pp. 4339-4352, 15 March15, 2021, doi: 10.1109/JIOT.2020.3026211.

– Merino, P.; Mujica, G.; Señor, J.; Portilla, J. “A Modular IoT Hardware Platform for Distributed and Secured Extreme Edge Computing“. Electronics 2020, 9, 538. doi.org/10.3390/electronics9030538

– Mujica, G.; Portilla, J. “Distributed Reprogramming on the Edge: A New Collaborative Code Dissemination Strategy for IoT,” in Electronics 2019, 8, 267. doi.org/10.3390/electronics8030313

– Portilla, G. Mujica, J. Lee and T. Riesgo, “The Extreme Edge at the Bottom of the Internet of Things: A Review,” in IEEE Sensors Journal, 2019. doi: 10.1109/JSEN.2019.2891911

– Mujica, G.; Rodriguez-Zurrunero, R.; Wilby, M.R.; Portilla, J.; Rodríguez González, A.B.; Araujo, A.; Riesgo, T.; Vinagre Díaz, J.J. Edge and Fog Computing Platform for Data Fusion of Complex Heterogeneous Sensors. Sensors 2018, 18, 3630.
https://doi.org/10.3390/s18113630

– Rodríguez, A.; Valverde, J.; Portilla, J.; Otero, A.; Riesgo, T.; de la Torre, E.” FPGA-Based High-Performance Embedded Systems for Adaptive Edge Computing in Cyber-Physical Systems: The ARTICo3 Framework”. Sensors 2018, 18, 1877.
https://doi.org/10.3390/s18061877

– J. Zornoza, G. Mujica, J. Portilla and T. Riesgo, “Merging smart wearable devices and wireless mesh networks for collaborative sensing,” 2017 32nd Conference on Design of Circuits and Integrated Systems (DCIS), Barcelona, Spain, 2017, pp. 1-6.
doi: 10.1109/DCIS.2017.8311637

– J. Zornoza, G. Mujica, J. Portilla, T. Riesgo, “Poster: Smart Self-Adaptive Clustering Technique for Collaborative Sensing in IoT Risk Contexts“, in Proceedings of the 2018 International Conference on Embedded Wireless Systems and Networks (EWSN 2018), Madrid, Spain, February 2018.

– G. Mujica, J. Portilla, T. Riesgo, Deployment Strategies of Wireless Sensor Networks for IoT: Challenges, Trends, and Solutions Based on Novel Tools and HW/SW Platforms, book chapter, Components and Services for IoT Platforms, 133-154, 2017.

– M. Holgado, M.V. Maigler, c, B. Santamaría, A.L. Hernandeza, A. Lavína, M.F. Laguna, F.J. Sanza, D. Granados, R. Casquela, J. Portilla, T. Riesgo, “Towards reliable optical label-free point-of-care (PoC) biosensing devices“, http://dx.doi.org/10.1016/j.snb.2016.06.047

-A Rodríguez, J Portilla, E de la Torre, T Riesgo, Teaching hybrid HW/SW embedded system design using FPGA-based devices,Design of Circuits and Integrated Systems (DCIS), 2016 Conference on, 1-5.

– G Mujica, J Portilla, T Riesgo,Teaching wireless sensor networks to master and PhD students based on the cookie node, Design of Circuits and Integrated Systems (DCIS), 2016 Conference on, 1-6.

– Christos Antonopoulos, Katerina Asimogloy, Sarah Chiti, Luca D’Onofrio, Simone Gianfranceschi, Danping He, Antonio Iodice, Stavros Koubias, Christos Koulamas, Luciano Lavagno, Mihai T. Lazarescu, Gabriel Mujica, George Papadopoulos, Jorge Portilla, Luis Redondo, Daniele Riccio, Teresa Riesgo, Daniel Rodriguez, Giuseppe Ruello, Vasilis Samoladas, Tsenka Stoyanova, Gerasimos Touliatos, Angela Valvo, Georgia Vlahoy, “Integrated Toolset for WSN Application Planning, Development, Commissioning and Maintenance: The WSN-DPCM ARTEMIS-JU Project“, in Sensors, June 2016, doi:10.3390/s16060804

– Wei li, Jorge Portilla, Felix Moreno, Guixiang Liang, Teresa Riesgo, “Multiple feature points representation in target localization of wireless visual sensor networks“, in Journal of Network and Computer Applications,  Nov 2015, doi:10.1016/j.jnca.2015.07.013

– G. Mujica, J. Portilla, T. Riesgo, “Performance evaluation of an AODV-based routing protocol implementation by using a novel in-field WSN diagnosis tool“, in MICPRO,Nov. 2015, doi:10.1016/j.micpro.2015.10.007

– G. Mujica, A. García, J. Gordillo, J. Portilla, t. Riesgo, “A novel on-site deployment, commissioning and debugging technique to assess and validate WSN based smart systems “, in Proceedings of ISCAS 2015, Lisbon, Portugal, May 2015.

– Valverde, J. ; Rodriguez, A.; Camarero, J. ; Otero, A. “A dynamically adaptable bus architecture for trading-off among performance, consumption and dependability in Cyber-Physical Systems“, in Field Programmable Logic and Applications (FPL), 2014 24th International Conference on, September 2014, Munich, DOI: 10.1109/FPL.2014.6927394

– Mujica, G.; Zamacola, R.; Portilla, J.; Riesgo, T., “Performance evaluation of an AODV-based routing protocol implementation by using a novel in-field WSN diagnosis tool,” Design of Circuits and Integrated Systems (DCIS), 2014 Conference on ,pp.1,6, 26-28 Nov. 2014, doi: 10.1109/DCIS.2014.7035607

– E. Quesada, M.V. Maigler, A. Barbado, J. Valverde, J. Portilla, T. Riesgo, “Environmental wireless sensor network deployment in food industry: From theory to practice“, Design of Circuits and Integrated Systems(DCIS), 2014 Conference on, 1-6

– D. He, G. Mujica, G. Liang, J. Portilla, T. Riesgo; Radio propagation modeling and real test of ZigBee based indoor wireless sensor networks. Journal of Systems Architecture, Volume 60, Issue 9, October 2014, Pages 711–725,doi:10.1016/j.sysarc.2014.08.002

– D. He, G. Mujica, J. Portilla, T. Riesgo, “Modelling and planning reliable wireless sensor networks based on multi-objective optimization genetic algorithm with changeable length“, in Journal of Heuristics, August 2014, DOI 10.1007/s10732-014-9261-2

– G. Mujica, V. Rosello, J. Portilla, T. Riesgo, “On-the-fly dynamic reprogramming mechanism for increasing the energy efficiency and supporting multi-experimental capabilities in WSNs“, in Proceedings of the IECON 2013, pp. 5455- 5460, Vienna, Austria, November 2013.

– D. He. J. Portilla, T. Riesgo, “A 3D multi-objective optimization planning algorithm for wireless sensor networks “, in Proceedings of the IECON 2013, pp. 5428- 5433, Vienna, Austria, November 2013.

– D. He, G. Liang, J. Portilla,  T. Riesgo, “A Novel Method for Radio Propagation Simulation Based on Automatic 3D Environment Reconstruction“, in Radioengineering, vol. 21, Nº. 4, December 2012.

– G. Mujica, V. Rosello, J. Portilla, T. Riesgo, “Hardware-software integration platform for a WSN testbed based on cookies nodes“, in Proceedings of the IECON 2012, pp. 6013 – 6018, Montreal, Canada, November 2012.

– D. He, G. Mujica, J. Portilla, T. Riesgo, “Simulation Tool and Case Study for Planning Wireless Sensor Network“, in Proceedings of the IECON 2012, pp. 6024 – 6028, Montreal, Canada, November 2012.

– G. Liang, D. He, J. Portilla, T. Riesgo, “A hardware in the loop design methodology for FPGA system and its application to complex functions “, 2012 International Symposium onVLSI Design, Automation, and Test (VLSI-DAT), April 2012.

– D. He, G. Liang, J. Portilla, T. Riesgo, “A Novel Method for Radio Propagation Simulation based on Automativ 3D environment Reconstruction“, in Proceedings of the EUCAP 2012, pp. 1445 – 1449, Prague, Czech Republic, March 2012.

– M. Lombardo, J. Camarero, J. Valverde, J. Portilla, E. de la Torre, T. Riesgo, “Power Management Techniques in an FPGA-Based WSN Node for High Performance Applications” in International Workshop on Reconfigurable Communication-centric Systems-on-Chip (ReCoSoC) 2012.

J. Valverde, A. Otero, M. Lopez, J. Portilla, T. Riesgo, “Using SRAM Based FPGAs for Power-Aware High Performance Wireless Sensor Networks“, in Sensors 2012, 12, 2667-2692.

– J. Valverde, V. Rosello, G. Mujica, J. Portilla, A. Uriarte, T. Riesgo, “Wireless Sensor Network for Environmental Monitoring: Application in a Coffee Factory“, in International Journal of Distributed Sensor Networks, 2012, 12 pages, doi:10.1155/2012/638067.

– V. Rosello, J. Portilla, T. Riesgo, “Ultra Low Power FPGA-Based Architecture for
Wake-up Radio in Wireless Sensor Networks
“, in Proceedings of the IECON 2011, pp. 3695 – 3700, Melbourne, Australia, November 2011.

– J. Portilla, A. Otero, E. de la Torre, T. Riesgo, O. Stecklina, S. Peter, and P. Langendörfer, “Adaptable Security in Wireless Sensor Networks by Using Reconfigurable ECC Hardware Coprocessors“, International Journal of Distributed Sensor Networks, Volume 2010 (2010), Article ID 740823, 12 pages.

– Y. E. Krasteva. J. Portilla, E. de la Torre, T. Riesgo, “Embedded Run-time Reconfigurable Nodes for Wireless Sensor Networks Applications“, IEEE Sensors Journal, vol 11 nº 9, pp 1800 – 1810,  2011.

– V. Rosello, J. Portilla,Y. E. Krasteva, T. Riesgo, “Wireless sensor network modular node modeling and simulation with VisualSense“, in Proceedings of the IECON 2009, pp. 2685 – 2689, Porto, Portugal, November 2009.

J. Portilla, T. Riesgo, A. Abril, A. de Castro, “Rapid prototyping for multi-application sensor networking“, 12 November 2007, SPIE Newsroom. DOI: 10.1117/2.1200711.0851

– J. Portilla, A. de Castro, E. de la Torre, T. Riesgo, “A Modular Architecture for Nodes in Wireless Sensor Networks”, Journal of Universal Computer Science (JUCS), vol. 12, nº 3, pp. 328 – 339, March 2006.

——————————————————————————————-

POSTERS AND DEMOS IN CONFERENCES

– G. Mujica, J. Portilla, T. Riesgo, “Poster Abstract: A Reliable Support Tool for Monitoring, Testing and Debugging Wireless Sensor Cookie Nodes”, in Poster and Demo Proceedings of the EWSN 2013, pp. 25 – 28, Ghent, Belgium, February 2013. [PosterAbstract]

– V. Rosello, J. Portilla, T. Riesgo, “Route-back delivery protocol for Collection Tree Protocol-based applications”, in Poster and Demo Proceedings of the EWSN 2013, pp. 9 – 12, Ghent, Belgium, February 2013. [PosterAbstract] [Poster]

– V. Rosello, J. Portilla, T. Riesgo, “Poster Abstract: Wake-up architecture for Wireless sensor nodes based on ultra low power FPGA”, in Poster and Demo Proceedings of the EWSN 2012, pp. 88 – 89, Trento, Italy, February 2012. [PosterAbstract] [Poster]

——————————————————————————————-

PhD thesis

PhD thesis, “Strategies and Tools for Deployment and Optimization of Wireless Sensor Networks”by Gabriel Mujica, February 2017

PhD thesis, “Run-Time Dynamically-Adaptable FPGA-Based Architecture for High-Performance Autonomous Distributed Systems“, by Juan Valverde, December 2015

PhD thesis, “Design and Validation of an Optimized MBOFDM
Ultra Wideband Transceiver System
“, by Guixiang Liang, July 2013.

PhD thesis, “A novel methodology for planning
reliable wireless sensor networks
“, by Danping He, March 2014.

PhD thesis, “Plataforma modular e interfaces genéricas de transductores para redes de sensores inalámbricas“, by Jorge Portilla, May 2010.

——————————————————————————————————–

Master Thesis and Final degree projects

Master Thesis, “FPGA-BASED WIRELESS SENSOR NODE ARCHITECTURE FOR HIGH PERFORMANCE APPLICATIONS“, by Juan Valverde, April 2012.

Master thesis, “Plataforma de Integración Hardware-Software para Testbed de Redes de Sensores Inalámbricas“, by Gabriel Noe Mujica, March 2012.

Master thesis,ESTUDIO DE BANDA DE FRECUENCIAS SUB-GHz PARA REDES DE SENSORES INALÁMBRICAS E IMPLEMENTACIÓN EN PLATAFORMA MODULAR“, by, Mariana Molina Matute, March 2011.

Master thesis,”MODELADO PARA SIMULACIÓN DE REDES DE SENSORES INALÁMBRICAS PREDESPLIEGUE BASADO EN VISUALSENSE“, by Victor Rosello, September 2009.